CTM 8084 Polyaspartic
Clear Fast Cure Polyaspartic Coating
Description
CTM 8084 is a two-component, 100% solids by volume fast setting VOC compliant, aliphatic polyaspartic polyurea that was developed for UV stable floor topcoats. It provides outstanding appearance, superior chemical, UV, and solvent resistance. It exhibits excellent physical properties. This system has been approved by the Canadian Food Inspection Agency (CFIA). CTM 8084 also meets FDA and USDA requirements
System Coverage Rates
- Over primer: 200 sq.ft./gal @ 8 mils
- Over vinyl flakes: 133-200 sq.ft./gal @ 8 mils
Advantages
- Primer SN enhances the bond of high-performance polyurethane and epoxy resin flooring systems
- Primer SN is eco-friendly;
- Primer SN has excellent adhesion properties to concrete substrates and high capacity for penetrating into concrete substrates;
- Primer SN can be applied to damp surfaces
- Primer SN&apos:s fluid consistency can seal cracks up to 1/32" (1mm) in width.
Areas of Use
Long pot life, Low Odour, Displays fast cure times with excellent adhesion; Superior abrasion and chemical resistance; Non yellowing and good gloss retention; Easy to mix 1:1 ratio by volume; exhibits a good bond to various substrate and existing coatings; VOC complaint in Canada and the United States
Packaging
2.0 gal kit
